Space Heaters
Dependable gas-fired poultry heater

  • 225,000 BTUH  heat output.
  • New! 250,000 BTUH model beginning August 2001.
  • Patent pending stainless steel burner for durability, efficient combustion, and reduced waste gases.
  • Purge cycle for safety.
  • Diagnostic light for easy trouble shooting.
  • Powerful ball bearing motor is totally enclosed
  • Internal pressure regulator.
  • Easily accessible electrical box for ease of service.
  • Galvanized cabinet; aluminized burner chamber.
  • Factory assembled for easy installation.
  • Removable side panels for easy access to burner, motor and controls.
At left, heater shown with front panel removed. Patented stainless steel burner has a unique flame port opening for a uniform flame pattern, eliminating "hot spots" which produce premature wear in the chamber.
Reliable Ignition

Electronic
Direct Spark Ignition is the same reliable system as used on our Shen Glow brooders.

Eliminates voltage variation problems. No broken ignitors to replace.
225,000 BTU model approved by the
Canadian Standards Association
for sale in Canada.
Options
  • Air deflector for heat distribution.
  • Thermostat with cord set.
  • Installation kit with regulator, hose and cut-off valve.
  • Outdoor installation kit.
  • LP or natural gas.
  • 225,000 BTU model available for 220V/50 cycle power supply.
  • CE Approved models available in 225,000 BTUH.
Specifications Summary
Note: Add "N" to model for natural gas.

New Addition August 2001: 250,000 BTUH model. Call for details!
Model SH-HA/HSIGalvanized, LP space heater, 225,000 BTUH, with hot surface ignition
Model SH-HA/DSIGalvanized, LP space heater, 225,000 BTUH, with direct spark  ignition
Input rating (LP or natural gas) 225,000 BTU 56,700 k/cal
 
Gas supply pressure LP 11" W.C. 28 mbar
Natural 7" W.C. 18 mbar
Ignition Hot Surface Ignition (HSI) or Direct Spark Ignition (DSI)
 
Cabinet 25" x 19.5" x 29.5"
63.5 x 49.5 x 74.9 cm
Galvanized steel; hinged service doors.
Stainless steel cabinet is optional; contact factory for availability.
Firing chamber Aluminized steel
Gas Consumption (max)
LP 225,000 BTUH - 56,700 k/cal 2.45 GPH - 9.3 l/hr
Natural 225,000 BTUH - 56,700 k/cal 225 CFH - 2.3 therm

Note: Fuel mixtures other than 100% liquid propane (LP) or natural gas may require special orifice sizes. This may alter the BTU output.

Weight
122 lbs. 55.4 kg  
Exit air Temperature 345° F 160° C
CFM 60 cycle 950 CFM at 1050 RPM
  50 cycle 780 CFM at 880 RPM
Electrical supply 115 V AC, 60 HZ, 3 amps, single phase
220V, 50 cycle power supply optional
*Specify when ordering.
Minimum clearance to combustibles
  top, bottom, sides and back 18" - 46 cm
front- air exit 72" - 183 cm
Installation kits Available for all models. Outdoor mounting kit available.
Patent #417,501
Must be installed in accordance with local building codes and manufacturer's installation instruction.
Do not use in human living quarters.
The policy of Shenandoah is one of continuous product improvement. We reserve the right to alter specifications
without prior notice.

Roxell, Shenandoah, Proterra Systems, Sibley
© Copyright by Shenandoah 2007, all rights reserved.